|
HELP PAGE |
||
|
This page is under constant update if you have any suggestions or questions that we can answer and put on this page to help others please E Mail them to us. The most commonly asked questions about EPDM are found here I want someone to view your roof but don't live in the South Wales area.
I need help with my order
I want to buy the EPDM synthetic rubber to do the roof myself how do I go about it
I want to learn a little more about this EPDM
How do I send an E-mail to Delston .
Do I need any special tools to install an EPDM roof
system?
Should I wait until my roof is leaking before I do
anything?
Do I need to replace any timberwork?
Do I need to strip the felt off my roof before I start?
Does the roof need to be perfectly dry before
installation?
What if I get stuck during installation?
No. The first synthetic rubber membranes, developed in America, were laid in the 1960's and are still protecting flat roofs some 50 years later.
The rubber membrane has a material guarantee of twenty years, the workmanship is guaranteed by the fitter and is usually twenty years.
Over Two Billion square meters of EPDM have been installed world wide from the glaring sun of the Middle East to the Arctic conditions of Alaska. Over One hundred Million square meters will be installed this year.
EPDM rubber is suitable for virtually all flat and low sloping roofs.
Yes. Delston Roofing offer a full service
including,
It has a smooth natural slate grey finish.
Yes, it is designed for maintenance access. For heavy usage such as roof patio areas it can be overlaid with a variety of durable finishes, paving slabs, timber or plastic decking etc.
No, despite its considerable technical advantages it compares well with other quality roofing systems and because of its long life span will often work out to be much cheaper over time.
EPDM is an inert material with limited environmental impact during manufacture and use of the product.
The manufactures have invested millions of dollars in manufacturing processes and branding. To protect these investments only trained and approved installers that have proved they can maintain the highest of standards have been allowed to use the materials. This has until recently been predominantly in the commercial sector, but is now at last also available, through approved installers and distributors to the residential market. Any competent person can install a simple EPDM roof.
Although these pages are checked regularly and every care is taken with the information within. Delston can not accept any responsibility or liability for information or results displayed within due to third party interference. All information was deemed correct at time of publication. Author Myrddin
a addurl associate_sites c conversion diy e epdm order fitalytrims g greenroofinstall greenroofs help home index instructions j joists laddersafety m mechanical o query r t
|
||